 | Super Bootable USB 2017 |
壹港人 |
|
| Super Bootable USB 2017 |
壹港人 |
| |
|
|
|
1. Download Super Bootable USB 2017 (Slim FAT32 Version) 210Mb / boot MENU as above. |
| 2. Unzip (password protected) and clone the 'Bot2017a.gho" image to any USB (size>1Gb). |
| 3. After cloning finished, test the USB boot up in other pc (make sure pc BIOS setting MUST be 1st boot is USB drive) |
| 4. Normally, the pc will start up with above Menu. Then you can select the OS to start. |
|
|
|
How to create Super Bootable USB 2017 (NTFS version) |
|
|
|
|
|
1. Download Super Bootable USB 2017 (NTFS Version) 726Mb / boot MENU as above. |
| 2. Unzip (password protected) and clone the 'Bot2017b.gho" image to any USB (size>1Gb). |
| 3. After cloning finished, test the USB boot up in other pc (make sure pc BIOS setting MUST be 1st boot is USB drive) |
| 4. Normally, the pc will start up with above Menu. Then you can select the OS to start. |
|
|
|
|
|
How to create Super Bootable USB 2017 (Full FAT32 version) |
|
|
|
1. Download Super Bootable USB 2017 (Full FAT32 Version) 869Mb / boot MENU as above |
| 2. Unzip (password protected) and clone the 'Bot2017c.gho" image to any USB (size>1Gb). |
| 3. After cloning finished, test the USB boot up in other pc (make sure pc BIOS setting MUST be 1st boot is USB drive) |
| 4. Normally, the pc will start up with above Menu. Then you can select the OS to start. |
| |
| |
|
*** |
If cloning done, the USB CANNOT boot up (error as below) |
*** |
|
|
| 1. Download Grub4dos v1.1 tools, unzip and run 'grubinst_gui.exe' |
|
2. Setting as below picture and click 'install' |
|
 |
|
|
3. After install OK (as below picture), 'ENTER' to exit program. |
|
 |
|
|
4. Test again the USB boot up in other pc (pc BIOS setting MUST be 1st boot is USB drive). This time SHOULD WORK OK. |
|
|
|
|
Checked / Tested OK by 壹港人 Dec 2016 |
